Filter
Top Products
10S1472-001-01 http://www.tyan.com
Memory Voltage:5V is the default. Some EDO memory uses 3.3V.
Damage to system can result if these are set incorrectly!
Volts J27 J28 J29 J30 J3 J4 J5
Default 5V On On On On Off Off Off
3.3V Off Off Off Off On On On
Tag RAM Setting: J8
J8
Enable on-board Tag on
Disable on-board Tag off
(When using COAST Module with Tag chip)
SRAM Select: J7
J7
Use on-board 256Kb SRAM 2-3
Upgrade to 512Kb w/256Kb COAST 1-2
CPU Multiplier: J21 and J22
J21 J22 Multiplier
off off x1.5
on off x2
on on x2.5
off on x3
Host Bus Setting: J31
J31 Host Speed PCI Speed
1-2,3-4 50MHz 25MHz
1-2 66.67MHz 33.33MHz
3-4 60MHz 30MHz