Tyco DIU 200 Network Card User Manual


  Open as PDF
of 2
 
TECHNICAL SPECIFICATIONS
PHYSICAL
Size 115x76x10mm(4.5x3.0x0.4”)
Weight 0.1Kg
Power
-Voltage 12Vdc
- Current 30mA (excluding locks and heads)
Consumption
Environmental
-Temperature -10ºto40ºC(14ºto104ºF)
- Humidity 95% non condensing
LEDIndicators +12VoltsOK,LocksupplyOK,LockStatus,
Watchdog,Fault,BatteryLow,RS485Rx
and TX.
FUNCTIONALITY
Inputs *DoorPosition
* Lock Status
*ExitPushButton
*GeneralPurpose
BreakGlassSense
FireAlarmSense
PowerFail
Tamper
BatteryLow(reportedinternally)
DedicatedPowerFailInput
* = 4 state tamper protected inputs
Outputs Two12Vor24Vopencollectoroutputs
limitedto1.5A
(Door Lock and External Sounder)
ReaderOutput 12V,limitedto800mA
Memory 32kBFlashmemory
COMMUNICATION INTERFACE
To Card Reader RS485 multidrop cable runs using copper
wirewithmaximumlengthof1.2km
without repeater
- Connection 2 part screw terminals
PRODUCT CODES
DIU/700/B00 DIU200(BoardOnlyModule)
DIU/700/000 DIU210(CompletewithPSU
BackplaneandEnclosure.
CEMSystemsLtdUnit4RavenhillBusinessParkRavenhillRoadBelfastBT68AWNorthernIreland
Tel: +44(0)2890456767Fax:+44(0)2890454535email:cem.sales@tycoint.com
www.cemsys.com
Interfaces
The DIU 200 Module provides direct interfaces to the
following devices:
• CEMCardReader
• ElectricDoorLock
• FireAlarmSystem
• BreakGlassUnit
• ExitPushButton
• Inputsfromalarmdevices
Up to 8 inputs can be wired from alarm/status monitoring
devices directly to the DIU 200 module. These devices are
used to monitor door sensors, DIU tamper and battery alarms
and fire/break glass emergency conditions.
If an input from the fire alarm system or break glass unit
changes state, the power to the door lock is automatically
dropped; this hardware-controlled facility ensures that the
door opens in an emergency situation. Details of alarm
conditions can be sent directly to the door controller or to
the host, via the card reader, for central alarm notification.
Board Protection
The DIU 200 has been designed to meet the UL294 standard
providing resistance to power supply tamper, limiting the
currenttoareadersothatshortingtogetherthe12Volt
terminals prevents the lock from opening.
Reader Inputs
The DIU 200 can also monitor the status of all the door
furniture inputs, freeing up the inputs on the intelligent CEM
reader for general purpose input monitoring.
Optional PSU Backplane Board and Enclosure
The DIU can also be supplied with an enclosure and
backplaneboard(DIU200)providingamainsinputPSU,
battery charging capabilities and door holder connections.
Alternative PSU Enclosure
The DIU 200 module has been tried and tested with the
Elmdene1380seriesenclosure.(www.elmdene.co.uk).
PRODUCT HIGHLIGHTS
CEM/B/046
Productspecicationsandavailabilityissubjecttochangewithoutnotice.Certainproductnamesmentionedhereinmaybetradenames
and/or registered trademarks of their companies.
 previous