42 Elo Entuitive Touchmonitor User Guide
Attention, consult accompanying documents with respect to electric Shock, fire and
mechanical hazard only in according with UL2601-1 and CAN/CSA C22.2 No. 601.1. medical equipment
certified for Canada, E230760,IEC60601-1.
Manufacturing
Elo TouchSystems Inc.
6500 Kaiser Dr. Fremont, CA 94555 U.S.A.
Rating:
LCD Monitor Input Rating: 12Vdc, 4A
adapter Chi Sam Electronic Enterprise Co., Ltd. Type CH-1204M rating: I/P: 100-240Vac, 47-63Hz, Output:
12Vdc, 4A
Classification
1. Protection against electric shock (5.1, 5.2)
Class I equipment, no applied parts
2. Protection against harmful ingress of water (5.3)
Ordinary Equipment (IPXO)
3. Degree of safety in the presence of a flammable anesthetics mixture with air or with oxygen or with nitrous
oxide (5.5)
Not suitable for use in the presence of a flammable anesthetics mixture with air or with oxygen or with
nitrous oxide.
4. Model of operation (5.6)
Continuous
Explanation Symbol
1. : DC Current
2. : ON/ OFF switch
Important Safety Instructions
Model: ET184XL-XXXB*, ET186XL-XXXB*.
1. Read the Safety Instruction carefully and keep it for use later.
2. Be aware of all warning and instruction signs marked on the products.
3. When cleaning, cut off the electrical supply at all times, Never use liquid or Aerosol detergent, use a damp
rag instead.
4. The LCD Monitor shall be operated according the following specification.
5. The adapter can be operated at an ambient temperature 10~40 C,RH 10%~90% maximum.
6. The adapter shall be operated in dry locations to protect from moisture.
7. Keep this product stable at any time. Otherwise the product may fall, hazarding the safety and causing
serious damage.
8. Do not clog apertures on the product's coating required for ventilation purpose.
Do not install this product in built_in installation without proper ventilation system.
Always keep this product away from all kinds of heat sources.
9. The power source used for this product must match one marked on the product's label.
Please consult your dealer or local technician if you have any doubt.
10. In order to avoid the electric shock hazard in use, a 3-wire type plug with a grounding pin is provided. Do
not use any kind of plug without grounding..
11. Do not lay the power cord on the pathway or rest anything heavy on it
12. Check the current flow tolerance of an extension cord before use, make sure that the total amount of the
product's current flow does not exceed the limit. A current flow of a wall outlet can never exceed up to 15
amperes.
13. Do not insert objects or pour liquid into this product through it's casting apertures. It may touch a high
voltage area causing electric shock or short the circuit.
14. Compliance with IEC EN 60601-1-2 and UL 2601-1, CLASS I
15. Transportation temperature/humidity: -20 C ~+60 C /RH 10% ~90%
16. The LCD Monitor Model ET184XL-XXXB*, ET186XL-XXXB*is intended use for medical purpose.
17. For repair of equipment parts designated by the manufacturer as repairable provided.