Filter
Top Products
17
S E C T I O N 7
Programming Access Codes
The Access Code Programming feature allows you to program access codes (the Master
Code may not be changeable with this feature) that will function on the security system as
well as on the Escort. Your system will either have 4- or 6-digit access codes. Depending
on what model of security system you have, you may have the option to program up to 37 of
these codes.
Access codes are programmed as follows:
While disarmed, access your security system (Section 2—Accessing Your Security System)
and select a partition (Section 2.5—If You Have a Two-Partition System).
Press [✱]. The system will prompt:
“For Automation Control and User Programming, press [5].”
Press [5]. The system will then prompt:
“For Automation Control, press [1].
For Temperature Control, press [2].
For User Programming, press [3].
To exit, press [#].”
Press [3]. Enter the [master code]. The system will then prompt:
“User Code Programming.
Enter the one-/two-digit User Number.
For User Option Programming, press [9].
Users X, Y and Z are programmed.
To exit, press [#].”
NOTE: Your system may or may not prompt you with the User Option Programming
prompt. Please consult your security system’s User’s Manual for more information on
User Options.
Enter the number that specifies which access code you want to program. The system will
announce:
“Enter the new 4-/6-digit access code.
To exit, press [#].”
Enter the new code. You will again be prompted:
“User Code Programming.
Enter the one-/two-digit User Number.
For User Option Programming, press [9].
Users X, Y and Z are programmed.
To exit, press [#].”
If you wish to program another access code, enter the user number. If not, press [#] to return
to the main menu.