Tyco S3010 Scanner User Manual


  Open as PDF
of 2
 
TECHNICAL SPECIFICATIONS
PHYSICAL
Size
 

 
Weight Reader less than 1 kg (2.2lbs)

 
Colour Light Grey
Power
 
- Current
 
Power
- Reader Power Charging Current Consumption: 1.1A

Power Save Mode: Minimal
- Base Station When charging batteries:

 
protected
 
read head
 
- Battery Charging Pins User Replaceable
 
backlight
Keypad 21 key membrane keypad.
FUNCTIONALITY
Memory 2MB
Database
- Cardholders Storage of up to 130,000
cardholders on the handheld reader.
- Transactions Up to 2,000 transactions in offline
operation.

- Card Motion Manual swipe/Insert/Presentation
(depending on head used)
 
Technologies Magnetic stripe IS02
Barcode using external reader
Proximity
Smart Card
Configuration Operational parameters are
downloaded from host controller via
the base station. Some
configuration setting can also be
set using the keypad.
COMMUNICATION INTERFACE
Base Station Communications Bi-directional optical link between
reader and base station
PRODUCT CODES
 
RDR/032/101 S3010 Portable Reader (Prox)
 

Tel: 
www.cemsys.com
Base Station
The S3010 base station provides a two-way communication
interface between the reader and the AC2000 central
computer or the webEntry controller. This allows card IDs
to be loaded from the central computer or the webEntry
controller to the reader database and stored transactions to
be transferred back to the central computer. The database

be returned to the base station to ensure that data is kept
current. The base station also provides battery management
circuitry.
Battery Management

external compartment. These provide operational power for up
to twenty hours of continuous use.
In order to extend battery life, the reader will enter
Powersave Mode after a period of inactivity. The time delay
from the last operation and shut down is user configurable,


reader is plugged into the base station, the batteries are “fast

control.

CEM/B/012 Rev I
Product specifications and availability is subject to change without notice. Certain product names mentioned herein may be trade names
and/or registered trademarks of their companies.
 previous