Tyco S9064 Network Card User Manual


  Open as PDF
of 2
 
www.cemsys.com
OVERVIEW
The S9064 Controller is an intelligent networked device, for door entry/exit control
and alarm monitoring. Part of the new generation of S9000 Controllers, the
S9064 is a central component of the fully expandable AC2000 integrated security
management system.
The S9064 Controller provides full 10/100 Base-T Ethernet connectivity, allowing
users to remotely perform database administration and monitor alarms. The
administrator can use both Telnet and web-based user interfaces to remotely
monitor the controller status at any time. In the event of communications failure
with the host server, card transactions and alarms are stored in memory, and will
be uploaded to the host when communications are restored.
The S9064 Controller supports four multidrop networks of card readers with up
to 16 master readers off each port (64 total). The readers communicate with the
controller using RS485 serial communications. Each master reader can additionally
support a push-button, or Exit reader for egress control.
S9064 Controller
•Intelligentembedded
network device for
access control and alarm
monitoring with the CEM
AC2000 system
•Supportsupto64doors
(128 readers IN/OUT)
•Batterybackupavailablein
case of power failure
•64MBcompactashfor
database with expansion
available
•Storagecapacityforupto
250,000 card records
•TCP/IPbaseddiagnostics/
monitoring available via web
browser or Telnet
•Databaseisretainedevenin
the event of battery backup
failure
FEATURES
S9064 Controller