Filter
Top Products
15D1
T
OUCHCOMPUTER
U
SER
G
UIDE
40
Thus, the settings for these USB Serial Ports should begin at COM3 and
end at COM7 in order.
4. To correct it, please follow the instructions below:
Double click the port you need to change. In this case, it is COM8.
COM8 is the 1
st
port of these USB serial ports so the “Location:” should
be “on USB Serial Converter A”. Please assign this serial port to COM3.
(COM4 for the USB Serial Converter B, COM5 for the USB Serial
Converter, COM6 for the 2
nd
set of the USB Serial Converter B and so on)
Change to COM3
L
ocation I
nformati
on