Filter
Top Products
8
Remove the Cable Cover
The cables are connected at the back of the monitor.
CAUTION Before connecting the cables to your touchmonitor and PC, be sure that the computer and
touchmonitor are turned off.
To remove the cable cover, place your thumbs at the top corners of the cable cover where
the indents are (above the arrows). Gently press and pull the cover toward yourself.
NOTE Before connecting the cables to the touchmonitor, route all the cables that you will be using through
the hole in the base as shown in the picture above. Only use one of the following: Serial or USB touch cable
and D-Sub 15 video cable or DVI video cable.
The following illustrations guide you step by step in connecting your touchmonitor using
a Serial or USB cable connection with D-Sub 15 or DVI video cable..
or