Ultra electronic Latin Series Printer User Manual


  Open as PDF
of 4
 
3506/07/01 Issue 1 LATIN SERIES DCR No. 26759
PRINTHEAD INSTALLATION & COMMISIONING
Removal of the Unserviceable Printhead
1. Ensure that the printer is switched off and disconnected from the mains
supply.
2. Release the door catch and lift open the door assembly.
3. Locate and release the Quick Release Fastener on the Print head
Assembly.
3. Gently lift the printhead assembly forwards and downwards away from the
lid
assembly.
4. Disconnect the electrical connector from the printhead.
Installing the Replacement Printhead
1. Ensure the printer is switched off and disconnected from the mains supply.
2. Locate the lugs on the printhead assembly in the cutaway receptacles on
the
lid assembly. Gently move the printhead upwards and backwards into
position.
3. Secure the Quick Release Fastener attaching the Printhead to the lid.
4. Reconnect the electrical connector to the printhead.
Your printhead is now fitted.
To complete the set up please turn to the
next page.
 previous