Filter
Top Products
Quick Start Guide Ultra Electronics Card Systems
Page 10 MAGICARD Sicura Laminator
The temperature will achieve the set
point level after a delay of 4 minutes,
and the READY indicator will illuminate.
Notes:
1. When switched on, the laminating
roller and take-up roll turn for
30 seconds or until a black
alignment panel is found by the
optical sensor.
2. The Ready LED will flash for
4 minutes until the roller has heated
up, cards cannot be fed in until
then.
3. Opening the roller lever will stop all
card/film movement. Closing the
lever performs a Reset function but
without the 4 minutes delay.