Filter
Top Products
Ultra Electronics Card Systems Quick Start Guide
MAGICARD TURBO Color Printer Page 17
Printer Setup procedure to be followed if the default
settings differ from your requirement:
Printer Setup
Changes to the printer setup options
performed via the Control Panel are
non-volatile, until subsequently
changed, even though the PC may be
switched off after use. Most software
applications provide the means to
change the printer setup but be warned
- these settings may prove to be
volatile with some applications and
your settings may be lost. Play safe
and use the Control Panel.
For WINDOWS 3.x
• Start WINDOWS and in the MAIN
group, select and open the CONTROL
PANEL window.
• Select and open the PRINTERS icon.
• The PRINTERS dialog box appears.
• Highlight the PrintMagic MAGICARD
Printer Driver and from the Options
menu, select PRINTER SETUP.
• The PrintMagic Printer Setup window
appears, which has six pages, any of
which may be viewed by clicking on the
appropriate tab.
For WINDOWS 95
• Go to the "My Computer" folder.
• Double Click on the Printers folder.
• Double Click the PrintMagic
MAGICARD Printer icon.
• Select "Printer" from the menu and go
to Properties.
• Select the Details tab.
• Select the Setup button.
Setup Options
The PrintMagic™ printing system is
designed to provide the best print
output default settings for your printer.
If you need to alter the default settings,
the PrintMagic™ printer driver provides
you with easy-to-use tab dialog boxes.
Along the bottom of the setup dialog
boxes is a row of four Pushbuttons,
OK, Cancel, Defaults and Help.
Initialise the Setup
Initialise the setup by pressing the
Default pushbutton.
Image Aspect
On this page, the card orientation may be
set. There are four options:-
§ Standard
Prints images on a
card with a border,
(MAGICARD 300 and
MAGICRD 300 Plus)
§ Rotate 180 Degrees
As Standard, but
rotated 180 degrees
§ Full Card
Full-bleed printing up
to the card edges.
(MAGICARD 300 Plus
and Turbo models).
§ Full Card 180
As Full Card but
Printer
Setup
K