Filter
Top Products
6
them. It doesn’t matter if the Gigabit copper port is connected before or after
the Mini GBIC port is connected. The Mini GBIC port always has higher
priority for connection. When the Mini GBIC port is connected, the Gigabit
copper ports are disabled.
Rear Panel
The 3-pronged power plug, on/off switch, and Ventilation fan are located at
the rear Panel of the DynaGST/2402G Gigabit Ethernet switch as shown in
Figure 2-2. The Switch will work with AC in the range 100-240V AC, 50-
60Hz.
Figure 2-2. Rear panel of the DynaGST/2402G Gigabit Ethernet switch
LED Indicators
The LED Indicators give a real-time indication of system operating status.
There are three LED-indicators (1000, LNK/ACT) for each Gigabit port and
one Power LED for the entire unit. The following table provides descriptions
of LED status.