Filter
Top Products
[ 41 ]
REGISTER THE HANDSET
If you purchase an extra handset, you need to register the handset to the
base before use. Only one handset can be registered at a time.
The handset ID for the supplied handset(s) was assigned at
the factory, which has #1 or #2 in the display (#2 for
models that have two handsets in packaging). When you
register additional handset to the base, the handset ID will
be assigned.
1) Before registering the extra handset, the
battery pack must be charged for
15-20 hours.
2) Place the extra handset in the main base
unit to begin registration.
3) While the handset is registering, Handset
Registering will appear in the LCD.
When Registration Complete is
displayed, the handset has been
registered to the base.
If Registration Failed appears,
please try these steps again.
Registration
Complete
Extra Handset
Extra Handset
Charger
Charger
Main Base
Extra Handset
+
Main Base
Charge the handset
for 15-20 hours.
Place the extra
handset in the main
base to register.
1
2
3
4
Place handset
on main base
to register
• An extra handset can
be registered when
the main base is in
standby mode.
• Standby Mode -
The handset is
not in use and
has
not been pressed.
UP409ZH (WDECT2315-2) OM 12/22/05 3:29 PM Page 41