Filter
Top Products
17
When you turn the Remote
Head off, you see the screen
to the right which reminds
you that power is still
applied to the target scanner.
Setting the BC-RH96 Backlight
To adjust the backlight brightness level on the Remote
Head, repeatedly press the VOL control. The display
cycles through available backlight brightness levels,
including off. Stop when you reach the desired level.
2QYGTKPIFQYP
VJGTGOQVGJGCF
QHHVJG5ECPPGT
FQGUPQVVWTP
Brightness Auto-Adjust (mobile scanners only)
When you connect a mobile scanner, the Remote Head
automatically adjusts its backlight brightness level to
match the brightness level of the target mobile scanner.
If you change the brightness level on either the Remote
Head or the target scanner, the level changes on
both devices at the same time. (This function is not
available on Handy Scanners.)
Note: If the Remote Head is connected to a BCT-
15 scanner, press F + VOL control to change the
backlight brightness level.