Uniden UBC57XLT Scanner User Manual


  Open as PDF
of 2
 
10
20 460.3625 MHZ
HOLD
CAUTION
1. Press either
or during
a search.
For example,
select .
These frequencies were used during
“setting a search range”.
4. Press
5. When the
scanner stops
at the frequency
you want, press
either or
After this step you are in search hold
mode. Press to resume
searching.
CHAIN 2
Storing Search Frequencies
You can quickly store any frequency you
find during search.
You must select the channel in
which you will store the frequency
before entering the search mode.
Otherwise, you may erase a
stored frequency that you want to
keep.
1. Press
2. Select a channel.
Enter the channel
number.
Then press
again or
scroll using
or .
3. Select one or
more of the
personal search
bands.
Repeat steps 2 through 6 for all the search
frequencies you want to store.
After this step you are in manual
mode.
6. Press to
store the
frequency in the
channel you
selected.
NOTE
NOTE
NOTE
NOTE
2. Press and
hold for
about two
seconds. You will
hear two beeps
when all the
frequencies have
been restored.
Youmustbeinsearchhold
before restoring all skipped
frequencies.
SKIP
MANUAL
MANUAL
SRCH
SRCH
CHAIN 2
460.0000 MHZ
SEARCH
CHAIN 2
460.5000 MHZ
SEARCH
E
20 460.3625 MHZ
SQ
SEARCH
CHAIN 1 2
1
SCAN
MANUAL
SRCH SLCT
HOLD
4
7
2
5
8
0
3
6
9
E
CLEAR
POL L/O
SKIP
PRI
LIGHT
SQL
LOCK
1
SCAN
MANUAL
SRCH SLCT
HOLD
4
7
2
5
8
0
3
6
9
E
CLEAR
POL L/O
SKIP
PRI
LIGHT
SQL
LOCK
HOLD
20 460.3625 MHZ
SQ
SEARCH
CHAIN 1 2
1
SCAN
MANUAL
SRCH SLCT
HOLD
4
7
2
5
8
0
3
6
9
E
CLEAR
POL L/O
SKIP
PRI
LIGHT
SQL
LOCK
1
SCAN
MANUAL
SRCH SLCT
HOLD
4
7
2
5
8
0
3
6
9
E
CLEAR
POL L/O
SKIP
PRI
LIGHT
SQL
20 460.4250MHZ
SQCHAIN 1 2
LOCK
1
SCAN
MANUAL
SRCH SLCT
HOLD
4
7
2
5
8
0
3
6
9
E
CLEAR
POL L/O
SKIP
PRI
LIGHT
SQL
LOCK
1
SCAN
MANUAL
SRCH SLCT
HOLD
4
7
2
5
8
0
3
6
9
E
CLEAR
POL L/O
SKIP
PRI
LIGHT
SQL
LOCK
1
SCAN
MANUAL
SRCH SLCT
HOLD
4
7
2
5
8
0
3
6
9
E
CLEAR
POL L/O
SKIP
PRI
LIGHT
SQL
LOCK
1
SCAN
MANUAL
SRCH SLCT
HOLD
4
7
2
5
8
0
3
6
9
E
CLEAR
POL L/O
SKIP
PRI
LIGHT
SQL
LOCK
Police Channel Lockout
Use If a particular channel continues to
interrupt Police Channel search scanning, it
is possible to set your scanner to lockout
the Police Channel.
If your scanner
stops while
searching,
press to
lockout the
Police Channel.
You can program 20 lockout
Channels. The 21st lockout Channel
entered causes the 1st to unlock.
1. Press , , repeatedly until the locked
out Police Channel appears in the display.
2. Press to unlock the Police Channel.
To unlock all Lockout Police Channel at
once, follow these steps:
1. Press either
or
during a Police
Channel search.
You must be in Search Hold before
restoring all locked out Police Channels.
2. Press and
hold for
about two
seconds.
Youwillhear
two beeps
when all the
channels have
been restored.
Note:
Note:
To unlock a Locked Out Police Channel
11
L/O
Police Channel Search
Police Channel Search will not
function in NZ.
Your is designed to scan 64
programmed Police Service frequencies.
1. Press to activate the Police Channel
Search.
While
searching
Police Channels,
' ' blinks.
2. When it finds an active Police Channel, it
stops and the frequency is displayed.
3. To resume searching, press .
1. Press or to stop the Police
Channel Search.
2. Press to move to the next higher
channel.
-OR-
Press to
move down to
the previous
channel.
3. Press to
resume
searching.
4. To exit Police Channel Search press,
,,,or.
You can quickly store any frequency
of Police Channel, like storing search
frequencies.
UBC57XLT
POLICE
Hold Feature
Note:
Note:
POL
POL
POL
2 POLICE
SQ
SLCTSRCH
MANUAL
SCAN
L/O
1
SCAN
MANUAL
SRCH SLCT
HOLD
4
7
2
5
8
0
3
6
9
E
CLEAR
POL L/O
SKIP
PRI
LIGHT
SQL
LOCK
1
SCAN
MANUAL
SRCH SLCT
HOLD
4
7
2
5
8
0
3
6
9
E
CLEAR
POL L/O
SKIP
PRI
LIGHT
SQL
LOCK
1
SCAN
MANUAL
SRCH SLCT
HOLD
4
7
2
5
8
0
3
6
9
E
CLEAR
POL L/O
SKIP
PRI
LIGHT
SQL
LOCK
2 468.425 MHZ
SQ
1
SCAN
MANUAL
SRCH SLCT
HOLD
4
7
2
5
8
0
3
6
9
E
CLEAR
POL L/O
SKIP
PRI
LIGHT
SQL
LOCK
1
SCAN
MANUAL
SRCH SLCT
HOLD
4
7
2
5
8
0
3
6
9
E
CLEAR
POL L/O
SKIP
PRI
LIGHT
SQL
LOCK
L/O
NOTE
HOLD
7
3. Press to
unlock the
channel.
Priority Scan
When priority scan is turned on, your
scanner checks the priority channel every
two seconds for activity. If a signal is
present on the priority channel, your
scanner monitors the channel until the
transmission ends, then resumes normal
scanning. You can designate any one of
the 20 available channels as your priority
channel.
To activate priority
scan (in either
manual or scan
mode):
1. Press
PRI
L/O
2
HOLD
460.3750 MHZ
SQ
1
SCAN
MANUAL
SRCH SLCT
HOLD
4
7
2
5
8
0
3
6
9
E
CLEAR
POL L/O
SKIP
PRI
LIGHT
SQL
Changing the Priority Channel
You cannot eliminate the priority channel,
but you can change it to any other of the
20 available channels.
1. Press
MANUAL
11
HOLD
460.4750 MHZ
SQ
1
SCAN
MANUAL
SRCH SLCT
HOLD
4
7
2
5
8
0
3
6
9
E
CLEAR
POL L/O
SKIP
PRI
LIGHT
SQL
LOCK
2. Select a new priority channel.
Enter the channel number. Then press
again or scroll using or .
MANUAL
4
HOLD
460.4250 MHZ
SQ
1
SCAN
MANUAL
SRCH SLCT
HOLD
4
7
2
5
8
0
3
6
9
E
CLEAR
POL L/O
SKIP
PRI
LIGHT
SQL
LOCK
2. Press again at anytime to deactivate
priority scan.
PRI
1
SCAN
MANUAL
SRCH SLCT
HOLD
4
7
2
5
8
0
3
6
9
E
CLEAR
POL L/O
SKIP
PRI
LIGHT
SQL
LOCK
LOCK
1. Press
You must
be in manual
mode before
restoring all
locked-out
channels.
2. Press and
hold for
about two
seconds.
Youwillheartwo
beeps when all
the channels
have been
restored.
Empty
channels
cannot be
deleted and are
always locked
out
Restore All Locked-out Channels
NOTE
NOTE
MANUAL
L/O
1
SCAN
MANUAL
SRCH SLCT
HOLD
4
7
2
5
8
0
3
6
9
E
CLEAR
POL L/O
SKIP
PRI
LIGHT
SQL
LOCK
1
SCAN
MANUAL
SRCH SLCT
HOLD
4
7
2
5
8
0
3
6
9
E
CLEAR
POL L/O
SKIP
PRI
LIGHT
SQL
LOCK
P4
HOLD PRI
460.4250 MHZ
SQ
1
SCAN
MANUAL
SRCH SLCT
HOLD
4
7
2
5
8
0
3
6
9
E
CLEAR
POL L/O
SKIP
PRI
LIGHT
SQL
LOCK
000.0000 MHZ
SQ
SEARCH
CHAIN 2
460.0000 MHZ
SQ
SEARCH
CHAIN 2
Chain Search
Use chain search to find active frequencies
in your area. You can search up to all five
personal bands or turn off those bands you
don’t want to hear. This gives you flexibility
of searching for any channel between 66
and 512 MHz, as long as they are within
the 8 frequency bands covered by the
.
Seethetableonpage3.
An error
message
displays when
is pressed
and you have not either specified a search
range in at least one chain search band.
-OR-
If you attempt to turn off all personal chain
search bands, the error tone beeps but
error will not be displayed.
Press to return to manual mode, or
press to select the band you want to
program.
To program a
frequency
range into one
of the five
personal chain
search bands,
follow these
steps:
1. Press repeatedly until the search
location you want appears in
the display.
UBC57XLT
Setting a Search Range
8
2. Enter lower
limit of the search
band.
a) Enter the
frequency
number.
b) Then
press
3. Press and hold
for two
seconds to
designate
this channel
as your new
priority channel.
Two beeps
indicate
that the priority
channel is
changed.
3. Enter upper
limitofthe
search band.
a) Enter the
frequency
number
b) Then press .
The
display
alternates
between the
upper and lower
ranges.
NOTE
2 Error MHZ
SQCHAIN
SLCT
SRCH
MANUAL
PRI
SLCT
and
and
460.0000 MHZ
SQ
SEARCH
CHAIN 2
460.5000 MHZ
SQ
SEARCH
CHAIN 2
E
E
The
display
alternates
between the
upper and lower
ranges. If you
programme the
wrong limit press
twice. Then,
begin again.
NOTE
460.5000 MHZ
SQ
1
SCAN
MANUAL
SRCH SLCT
HOLD
4
7
2
5
8
0
3
6
9
E
CLEAR
POL L/O
SKIP
PRI
LIGHT
SQL
SEARCH
CHAIN 2
LOCK
000.0000 MHZ
SQ
SEARCH
CHAIN 2
1
SCAN
MANUAL
SRCH SLCT
HOLD
4
7
2
5
8
0
3
6
9
E
CLEAR
POL L/O
SKIP
PRI
LIGHT
SQL
LOCK
P4
HOLD PRI
460.4250 MHZ
SQ
1
SCAN
MANUAL
SRCH SLCT
HOLD
4
7
2
5
8
0
3
6
9
E
CLEAR
POL L/O
SKIP
PRI
LIGHT
SQL
LOCK
1
SCAN
MANUAL
SRCH SLCT
HOLD
4
7
2
5
8
0
3
6
9
E
CLEAR
POL L/O
SKIP
PRI
LIGHT
SQL
LOCK
Frequency Skip
If a particular frequency continues to
interrupt searching, it is possible to set your
scanner to skip the frequency.
If your scanner
stops while
searching, press
to lockout
the frequency
from the
search range.
2. Press to
move the next
higher frequency
-OR-
(See step 3)
3. Press to
move down to
the previous
frequency.
4. Press to
resume
searching.
9
4. Either press
to begin
your search.
Your scanner searches each
selected chain search band. The
display flashes the number of the band
while it’s searched. Other bands which are
programmed and selected are displayed
but do not flash
-OR-
Press to move to the next chain
location.
5. To turn off a
chain search
band during
searching, press
its location
number.
For example,
(a) if chain
search locations
and are
selected,
(b) press to
turn off band
three so that it’s
not scanned
during your
search.
Press or
at anytime to
stop the search.
1,2 3
Search Hold
Feature
You can program 10 skip
frequencies. The 11th skip
frequency entered causes the 1st
skip frequency to unlock.
To unlock all skip frequencies at once,
follow the next steps:
NOTE
a
b
1 460.4250 MHZ
SQ
SEARCH
CHAIN123
1 460.4250 MHZ
SQ
SEARCH
CHAIN 1 2
000.0000 MHZ
SQ
SEARCH
CHAIN 3
NOTE
3
SLCT
SRCH
The search continues toward either the
upper or lower search limit, depending on
which direction key ( or ) was
pressed last.
SRCH
SKIP
1
SCAN
MANUAL
SRCH SLCT
HOLD
4
7
2
5
8
0
3
6
9
E
CLEAR
POL L/O
SKIP
PRI
LIGHT
SQL
LOCK
1
SCAN
MANUAL
SRCH SLCT
HOLD
4
7
2
5
8
0
3
6
9
E
CLEAR
POL L/O
SKIP
PRI
LIGHT
SQL
LOCK
1
SCAN
MANUAL
SRCH SLCT
HOLD
4
7
2
5
8
0
3
6
9
E
CLEAR
POL L/O
SKIP
PRI
LIGHT
SQL
LOCK
1
SCAN
MANUAL
SRCH SLCT
HOLD
4
7
2
5
8
0
3
6
9
E
CLEAR
POL L/O
SKIP
PRI
LIGHT
SQL
LOCK
1
SCAN
MANUAL
SRCH SLCT
HOLD
4
7
2
5
8
0
3
6
9
E
CLEAR
POL L/O
SKIP
PRI
LIGHT
SQL
LOCK
1 460.4250 MHZ
SQ
SEARCH
CHAIN123
1
SCAN
MANUAL
SRCH SLCT
HOLD
4
7
2
5
8
0
3
6
9
E
CLEAR
POL L/O
SKIP
PRI
LIGHT
SQL
LOCK
1
SCAN
MANUAL
SRCH SLCT
HOLD
4
7
2
5
8
0
3
6
9
E
CLEAR
POL L/O
SKIP
PRI
LIGHT
SQL
LOCK
12
W
arranty
Warranty
One Year Limited Warranty
ELEMENT OF WARRANTY: UBC57XLT
WARRANTY DURATION:
PARTS COVERED:
STATEMENT OF REMEDY:
PROCEDURE FOR OBTAINING PERFORMANCE OR WARRANTY:
UNIDEN AUSTRALIA PTY LIMITED UNIDEN NEW ZEALAND LIMITED
Important: Evidence of original purchase is required for warranty service.
Warrantor: Uniden Australia Pty Limited A.B.N. 58 001 865 498
Uniden New Zealand Limited
Uniden warrants to the original retail owner for the duration of this warranty, its
(herein after referredto as the Product), to be free from defects in materials and crafts-manship with only the
limitations or exclusions set out below. This warranty to the original retail owner only, shall
terminate and be of no further effect 12 months after the date of original retail sale. This warrantywill be deemed
invalid if the product is; (A) Damaged or not maintained as reasonable and necessary, (B) Modified, altered orused as
part of any conversion kits, subassemblies, or any configurations not sold by Uniden, (C) Improperly installed, (D)
Repaired by someone other than an authorised Uniden Repair Agent for a defect or malfunction covered by this
warranty, (E) Used in conjunction with any equipment or parts or as part of a system not manufactured by Uniden, (F)
Warranty is only valid in original country of purchase. Thiswarranty covers for one (1) year, the
Main Unit only. All accessories (AC Adaptor, Belt Clip etc)are covered for 90 days only. In
the event that the product does not conform to this warranty at any time while this warrantyis in effect, the warrantor
at its discretion, will repair the defect or replace the product and return it to you without charge for parts or service.
THIS WARRANTY DOES NOT COVER OR PROVIDE FOR THE REIMBURSEMENT OR PAYMENT OF INCIDENTAL OR
CONSEQUENTIAL DAMAGES. THIS GUARANTEE IS IN ADDITION TO AND DOES NOT IN ANY WAY AFFECT YOUR
RIGHTS UNDER THE CONSUMER GUARANTEE ACT.
In the event that the product does not conform to this warranty, the Product should be shipped or delivered, freight
pre-paid, with evidence of original purchase (eg. a copy of the sales docket), to the warrantor at:
SERVICE DIVISION SERVICE DIVISION
345 Princes Highway, 150 Harris Road,
Rockdale NSW 2216 East Tamaki, Auckland
Ph (02) 9599 3355 Fx (02) 9599 3278 Ph (9) 273 8383 Fx (9) 274 4253
1300 366 895 0800 4 UNIDEN
4 864 336
www.uniden.com.au www.uniden.co.nz
Customers in other States should ship or deliver the Product freight pre-paid to their nearest Uniden Authorised Repair
Centre (Contact Uniden for the nearest Warranty Agent to you)
Troubleshooting
If your is not performing properly, try the following steps.
Problem Suggestion
Improper reception 1. Check the antenna connection or move and reposition the
antenna.
2. Move the scanner.
3. You may be in a remote area which could require an optional
multiband antenna. Check with your dealer or local
electronics store.
Scan won’t stop 1. Adjust squelch threshold - refer to page 4, Setting the
Squelch.
2. Check the antenna connection.
3. Check to see if many of the channels are locked-out. If so,
the scanner has less chance of finding an active channel.
4. Review each channel’s frequency to see if it is still stored in
memory and is correct.
5. It’s possible that none of the programmed frequencies are
currently active.
Scan won’t start. 1. Press the SCAN key again.
2. Confirm SQUELCH function is on.
3. Check to see if all channels are locked out.
UBC57XLT
PrintedintheChina UBZZ01313AZ
THANK YOU
FOR PURCHASING A UNIDEN SCANNER!
UBC57XLT Map Manual.prn
UBC57XLT Manual
Wednesday, September 24, 2003 4:58:45 PM
Color profile: Disabled
Composite 200 lpi at 45 degrees
 previous