Vantec UGT-UF100 Computer Drive User Manual


  Open as PDF
of 7
 
Hardware Installation
UGT-UF100Page4
4
1. Turn Off the power to your computer.
2. Unplug the power cord and remove your computer’s cover.
3. Remove the slot bracket from an available PCI slot
4. To install the card, carefully align the card’s bus connector
with the selected PCI slot on the motherboard. Push the
board down firmly.
5. Connect the system power source to the board’s power
connector.
6. Replace the slot bracket’s holding screw to secure the card.
 previous next