Filter
Top Products
VBDIRECTORY USERS GUIDE VERSION 4.1
COPYRIGHT VBRICK SYSTEMS PAGE 15 JUNE 2007
VB1000-2000-3000 Settings
The following VBrick settings affect interoperability between the VB1000-2000-3000 series
appliance and VBDirectory.
Host Name
The Host Name is set in the Network
section of VBAdmin or in the
corresponding Command Line (CLI)
instructions. Please refer to the VBrick
Users Guide.
Management SAP
These parameters define information used in the SAPs emitted by the VBrick, which are
received by the VBDirectory management tool and other VBrick applications. They are found
in the Management SAP section of VBAdmin. Please refer to the VBrick 1000-2000-3000
Users Guide.
Management SAP IP Address – The
default address from which Management
SAPs are obtained by VBDirectory is
224.2.133.134, port 9876. Sending SAPs
from a VBrick to any address other than
that, without changing the default
VBDirectory configuration will make
Management SAPs invisible to
VBDirectory.
SAP Transmit enabled – SAP transmit
must be enabled in the SAP option
settings.
Timeout – The retransmit time set in the
VBrick must be less than the SAP
timeout value set in VBDirectory. The
VBDirectory default timeout value is set at
25 seconds.
Group Name – This parameter defines the Group Name for this box. It is included in the
Management SAPs used by VBDirectory. It is an optional setting used for organizing VBricks
into groups to simplify use of VBDirectory.