ACCESSORIES
PLEASE CHECK AND IDENTIFY THE SUPPLIED ACCESSORIES.
AC ADAPTER ......................................................................... X 1
CAR POWER ADAPTER .......................................................... X 1
MOUNTING STRAP FOR MONITOR ........................................ X 1
CARRYING BAG ..................................................................... X 1
1) DC IN 12V jack
2) POWER ON/OFF switch
3) POWER indicator
When the Power ON/OFF switch
to ON position, the light will
illuminate.
4) AV1 (VIDEO IN / AUDIO IN [L/R])
jacks
5) AV1/AV2 switch
6) AV2 (EASY VIEW CABLE) socket
7) Headphone jacks
8) BRIGHTNESS control
Adjust the relative lightness or
darkness of the color.
9) COLOR control
Adjust for color intensity.
10) SCREEN switch
16:9 Wide-screen
4:3 Pan screen
11) VOLUME control
Adjust the volume.
CONTROL REFERENCE GUIDE
POWER SUPPLY
B. USING THE CAR POWER ADAPTER
The included car power adapter is designed for use with vehicles that have a
12V, negative ground electrical system.
Cautions:
• Use this monitor only with the included car power adapter, use with other car power
adapter could damage the monitor.
• The included car power adapter is for use with this monitor only. Do not use it with other
equipment.
• In the interests of traffic safety, do not operate the monitor or view video software while
driving the vehicle.
• Make sure the monitor is secured correctly to prevent it from falling inside the vehicle in
the event of an accident.
• When the inside of the cigarette lighter socket is dirty with ashes or dust, the plug section
may become hot due to poor contact. Be sure to clean the cigarette lighter socket before
use.
• After use, disconnect the car power adapter from both the monitor and cigarette lighter
socket.
Cautions:
• The included AC adapter is for use with this monitor only. Do not use them with
other equipment.
• When the monitor is not going to be used for long time, disconnect the AC adapter
from the wall outlet.
AC ADAPTER
LEFT SIDE OF
MONITOR
TO WALL
OUTLET
1
TO DC IN
12V JACK
2
A. USING THE AC ADAPTER
This AC adapter operates on AC between 100V and 240V.
CAR POWER
ADAPTER
LEFT
SIDE OF
MONITOR
TO DC IN
12V JACK
2
TO THE CIGARETTE
LIGHTER SOCKET
1
INSTALLING THE MONITOR IN CAR
• Use supplied mounting straps installing the monitor onto the seat back in a car.
2)Tightly wrap the mounting strap
around the headrest.
SAFETY WARNING!
• This monitor should never be used by the vehicle's driver or left unsecured in the
vehicle while driving.
• If this monitor is being used in your vehicle, be sure that it is secured or held
safely, and does not obstruct any safey device, including air bags or seat belts.
• All passengers should wear seat belts when using this monitor in a moving
vehicle.
• If in doubt, please contact your vehicle manufacturer for further advice.
1)Loop the safety band around the
headrest.
CONNECTIONS
Watching a DVD player and VCR
1. Turn on the monitor (the AV1 / AV2 switch in AV1 position).
2. Turn on the DVD player or VCR and follow the instructions provided with it to playback.
Note: If you have a mono VCR, the volume level from the speakers will be low.
BOTTOM OF MONITOR
AUDIO / VIDEO
CABLE
(Yellow) (Red)
(White)
(Yellow)
(Red)
(White)
DVD PLAYER / VCR
A. CONNECTING THE DVD PLAYER OR VCR
AV1 AV2
VIDEO
OUT
AUDIO
OUT
Tear off this label and
connect Easy View
cable to other products
(please see
“Connecting this
monitor to other
products with Easy
View cable interface”)
Strap
Safety Elastic band
Strap
Safety Elastic Band