Filter
Top Products
24
Chipset Configuration:
AGP Mode: If K7VT4-4X motherboard is installed for your PC system, you
may select [4X], [2X], or [1X] as the AGP mode. But when an 8X-AGP-
card is installed on K7VT4-8X motherboard for your PC system, this
feature will be set to [Auto] automatically.
AGP Aperture Size: It refers to a section of the PCI memory address range
used for graphics memory. It is recommended to leave this field at the
default value unless the installed AGP card’s specifications requires other
sizes.
AGP Fast Write: This allows you to enable or disable the feature of AGP fast
write protocol support.
PCI Delay Transaction: Enable PCI Delay Transaction feature will free the PCI
Bus when the CPU is accessing 8-bit ISA cards. Disable this feature
when using ISA cards that are not PCI 2.1 compliant.
USB Controller: Use this to enable or disable the use of USB controller.
USB Device Legacy Support: Use this to enable or disable the support to
emulate legacy I/O devices such as mouse, keyboard,... etc.
DRAM CAS# Latency: This is used to adjust the means of memory accessing.
Configuration options: [Auto], [2T], [2.5T], [3T].
Please note that not all the DDR DIMMs can support CAS latency=3T.
Over Vcore Voltage: This feature allows you to increase the CPU Vcore
voltage around 3% or 6%. The default value is [Disabled].
It is not recommended to enable “Over Vcore Voltage” feature.
Doing so may cause CPU damage.
AMIBIOSSETUPUTILITY-VERSION3.31a
Advanced
AGP Mode
AGP Aperture Size
AGP Fast Write
PCI Delay Transaction
USB Controller
USB Device Legacy Support
DRAM CAS# Latency
Over Vcore Voltage
[ SetupHelp ]
F1:Help
Esc:PreviousMenu
F9:SetupDefaults
F10:Save&Exit
+/-:ChangeValues
Enter:Select
Sub-Menu
:SelectItem
ChipsetConfiguration
64MB
Disabled
Disabled
Disabled
Disabled
Auto
Disabled
<Enter> to select [4X],
[2X], [1X] as the AGP
mode.
Auto