Filter
Top Products
6
[How to stop using]
Do [unmount] at Device Control.
1.1.3 Mac
No need to install the installation driver at Mac OS 9.x version and the MEDIASTATION will be detected automatically. If the MEDIASTATION
is detected correctly, an icon is appeared at a monitor.
When removing MEDIASTATION safely, drag the icon to a trash and unplug MEDIASTATION.
2. Access PC via Network
2.1 Connect LAN Cable
When connecting with IP Router or HubWhen connecting Computer to MEDIASTATION directly
Connect LAN cable to LAN port between MEDIASTATION and PC. In
this case, you have to use Cross LAN cable type generally.
[TIP] If the computer’s LAN card was connected to Internet line, you
can mount additional LAN card to your PC and connect that additional
LAN card to MEDIASTATION.
Connect LAN cable to LAN port between IP Router or Hub.
In this case, you have to use Direct LAN Cable type generally.
2.2 Set Network Confi gurations
After connecting LAN cable, you have to set network confi gurations of Computer and MEDIASTATION.
You need to share a folder on Windows computer and use same ‘IP Address range’ and same ‘Subnet Mask ‘ between Windows computer and
MEDIASTATION. For example,
*It is possible to assign IP address and Subnet Mask of MEDIASTATION as dynamic or static.
Computer MEDIASTATION
IP Address 192.168.1.2 192.168.1.3
Subnet Mask 255.255.255.0 255.255.255.0