Filter
Top Products
4
5. Operation Controls and Functions
Front Panel
Menu(Enter): Press the Menu button will bring up the OSD menu controls on the screen
as follows:
Input set up
Output set up
Picture Adjust
HV Adjust
OSD Adjust
System Information
Auto Adjust
Exit
Use + or - to move the arrow cursor to your desired selection, then press MENU (Enter) to
confirm your selection and enter into sub menu.
Output set up- When it is selected, the following sub-menu will appear, use +, - button to
choose your desired PC or HDTV output from the following output resolution.
HDTV
720p-RGB
576p-RGB
480p-RGB
1080i-RGB
720p-YPbPr
576p-YPbPr
480p-YPbPr
1080i-YPbPr
1280X 720@60Hz
720X 576@60Hz
720 X 480@60Hz
1920x1080@60Hz
1280 X 720@50/60Hz
720 X 576@60Hz
720 X 480@60Hz
1920x1080@50/60Hz
PC
SXGA
1280A
XGA
WXGA
SVGA
VGA
VGA 70
VESA 85
1280 X 1024@60/75Hz
1280 X 960@60Hz
1024 X 768@60/70/75/85Hz
1280 X 768@60Hz
800 X 600@60/72/75/85Hz
640 X 480@60/72/75/85Hz
720 X 400@70Hz
640 X 400@85Hz
1152 X 864@ 70/75Hz
Clock
Phase
32/64
22/32
Use +, - to choose the parameter your want to adjust and then press the Menu(Enter) to
highlight your selection. Once a parameter is highlighted, use +, - to increase or decrease the
setting value.
Press Menu(Enter) again to leave the setting.
Move the arrow to exit then press Menu/Enter to Exit.
Input set up- When it is selected, a sub menu of clock and phase adjust as below will appear.
Rear Panel
Output Setup
Mode XGA-60
Output resolution:
PC/HD OUTPUT
MENU
-
+
XGA
480p
DC 12V 0.8A
PC /HDTV IN