Filter
Top Products
Operation Controls and Functions
Rear Panel
1 4
2 3
1. DVI output: Connect the DVI output to the DVI input of
your display using DVI cable.
2.DVI inputs: Connect your various DVI sources to each of the
DVI input of the unit using DVI cables.
3. Power: Plug the supplied 5VDC power supply into the unit.
4. RS232: 9-pin D-sub female connector for connecting to your other control
console for remote control.
Remote Control
CR-22
1
3
2
1. Power:
Press the button to turn on/off the unit.
2. Direct input selector:
Press numerical number button to select your desired
input source.
3. Void buttons (No function). If the button number is
greater than the total input number of the unit then
the button is of no function.
Specifications
* Frequency bandwidth: 1.65Gbps(single link)
* Inputs: 4 x DVI female ports (Type A connector)
* Output: 1 x DVI female port (single link)
* 5VDC universal power supply
* Weight: 1kgs
* Dimension: 240(W) x104(D) x 44(H)mm
RS-232
DVI IN 4 DVI IN 3 DVI IN 2 DVI IN 1
DC 5V
DVI OUT