Video Products USB-SUN Computer Hardware User Manual


  Open as PDF
of 4
 
2
Setup
When using the USB-SUN adapter to connect to an NTI KVM switch:
1. Connect one male 8 pin minDIN end of the SKTINT-xx-MM cable to a female 8 pin minDIN Keyboard and Mouse input port on the
NTI KVM switch being used (see Fig. 3). Switch the power ON to the KVM switch if it isn't already.
2. Connect the other male 8 pin miniDIN end of the SKTINT-xx-MM cable to the 8 pin miniDIN female port on the USB-SUN
adapter.
3. Connect the USB type B male connector of the USB-AB-0.5M-5T cable (see Fig. 4) to the USB type B female port on the USB-
SUN adapter.
4. Connect the USB type A male connector of the USB-AB-0.5M-5T cable (see Fig. 5) to a USB type A female port on the host
computer. Note: It is important to make this connection last, particularly if the host computer is already ON at the time of
connection.
When using the USB-SUN adapter to connect a SUN Keyboard and/or Mouse to a SUN CPU with a USB port:
1. Connect the 8 pin minDIN male connector of the SUN keyboard and mouse assembly into the female 8 pin miniDIN port
on the USB-SUN adapter.
2. Continue with steps 3 and 4 above.
USB Type A Male
Connector
USB Type B Male
Connector
Fig. 3
Fig. 4
Fig. 5
Mating Face of a 8 Pin miniDIN Female
 previous