Filter
Top Products
38
Vidikron Vision Model 50 Owner’s Operating Manual
Press ENTER to display the HD/RGB Adjust menu. Use these
settings to fine-tune 480p and higher-resolution signals for
optimum picture quality.
• Auto: To adjust the phase, frequency and position
automatically, highlight “YES?” and press ENTER.
• Freq.: Adjusts the frequency of the signal.
• Phase: Adjusts the phase of the input signal (similar to
tracking on a VCR).
• H. Pos.: Adjusts the horizontal position of the image.
• V. Pos.: Adjusts the vertical position of the image.
NOTE: To adjust the image position with a 480i source, use the Image Shift controls in the Service
menu, described on page 41.
Press the ▲ or ▼ arrow buttons to turn on or off the Blue Enable feature. Blue Enable
removes all red and green color information from the image, and is useful for color-
calibrating the projector or other video components.
Once the desired adjustments have been made, select Save Settings to save these settings
into the “Custom 1” memory location.
To recall stored custom image quality settings, select Load Saved Settings and choose
“Custom 1,” “ISF Night” or “ISF Day.”
On-Screen Display Menus
HD/RGB Adjust
Blue Enable
Save Settings
Load Saved Settings
HD/RGB Adjust
Auto Adj. YES?
Freq. 0
Phase +10
H.Pos. 0
V.Pos. 0