Filter
Top Products
Installation
Vidikron VL-52 and VL-57 Owner’s Operating Manual 21
PRE
L
IMINAR
Y
Connecting External
Speakers (Optional)
Connect the (positive) and (negative) speaker wires to the rear-panel SPEAKER-R and
SPEAKER-L terminals; see Figure 3-8. Maintain the correct polarity. For more information,
refer to the owner’s manual for your speakers.
Figure 3-8. External Speaker Connection
Connecting to a Dolby Digital
Amplifier
If your home theater has a Dolby Digital amplifier or receiver, connect the digital audio
output from the DView to the digital audio input of the amplifier/receiver as shown in
Figure
3-9. The DView supports both coaxial (S/PDIF) and optical (TosLink) digital audio
connections.
Figure 3-9. Digital Audio Connection
12 mm
Twist exposed
wire strands
together.
Right Speaker Left Speaker
Push tab to the
open position, and
insert the wire.
Then, close tab firmly to
secure the wire in place.
The audio output level is fixed. (The volume and mute controls affect only
the speaker and headphone outputs.)
Note
Digital Audio Cable,
Optical
(Sold Separately)
Digital Audio Cable,
Coaxial
(Sold Separately)
Dolby Digital
Amplifier
- or -