ViewSonic PJ551D Projector User Manual


 
ViewSonic 1 PJ551D
Introduction
Projector Features
The projector integrates high-performance optical engine projection and a user - friendly
design to deliver high reliability and ease of use.
The projector offers the following features:
Single chip 0.55" Texas Instruments DLP
®
technology
XGA (1024 x 768 pixels)
Auto image re-sizing (Auto-Sync.) to 1024 x 768 full screen with scaling compression
compatibility for VGA, SVGA, XGA and SXGA*
Compatibility with Macintosh
®
computers
Compatibility with NTSC, PAL, SECAM and HDTV
D-Sub 15-pin terminal for analog video connectivity
User-friendly, multi-language on-screen display
Advanced electronic keystone correction
* means compressed.
Ground
Notes on the AC Power Cord
AC Power Cord must meet the requirement of countries where you use this projector.
Please confirm your AC plug type with the graphics below and ensure that the proper AC
Power Cord is used. If the supplied AC Power Cord does not match your AC outlet, please
contact your sales dealer. This projector is equipped with a grounding type AC line plug.
Please ensure that your outlet fits the plug. Do not defeat the safety purpose of this
grounding type plug. We highly recommend using a video source device also equipped
with a grounding type AC line plug to prevent signal interference due to voltage
fluctuations.