Filter
Top Products
Allow you to enter the Video Setting menu.
Sharpness: Sharpen or soften the image.
Tint: Shift colors toward red or green.
Color: Adjust the color saturation level.
Audio Setting
Allow you to enter the Audio Setting menu.
Volume: Adjust the projector’s volume level.
Mute: Cut off the sound temporarily.
Setting
Projector Projection
Adjust the picture to match the orientation of the projector: upright or upside-down, in
front of or behind the screen. Invert or reverse the image accordingly.
Menu Setting
Allow you to enter the Menu Setting menu.
Menu Position: Choose the menu location on the display screen.
Menu Display Time: Duration of OSD menu display countly starts (at idle state by
second).
OSD Transparency: Select to change the transparency level of the OSD
background.
Signal Type
Specify the source to the COMPUTER IN 1/COMPUTER IN 2 terminal that you wish to
project.
Auto : Automatically detect the input signal type from COMPUTER IN 1 and
COMPUTER IN 2 terminals.
RGB : For VGA signal
YCbCr/YPbPr:For component signal
Blank Screen
Blank the screen temporarily, and select the screen color when this function is active.
Message
Enable or disable the message box at the right bottom of the screen.
Auto Source
Automatically scan through all the input source.
Power Saving
If the input source is not detected and no operation is performed for a specific period of
time, projector will automatically turn off.
Green Mode
Enable this function when power consumption is under 1W.
29