Filter
Top Products
53
Function Description
Language
Sets the language for the On-Screen Display (OSD) menus. See
"Using the menus" on page 23 for details.
Projector
Position
The projector can be installed on a ceiling or behind a screen, or
with one or more mirrors. See "Choosing a location" on page 12
for details.
Auto Power
Off
Allows the projector to turn off automatically if no input signal
is detected after a set period of time. See "Setting Auto Power
Off" on page 57 for details.
Blank Timer
Sets the image blank time when the Blank feature is activated,
once elapsed the image will return to the screen. See "Hiding the
image" on page 37 for details.
Panel Key
Lock
Disables or enables all panel key functions except POWER
on the projector and keys on the remote control. See "Locking
control keys" on page 37 for details.
Splash
Screen
Allows you to select which logo screen will be displayed during
projector start-up.
Screen
Capture
Captures and stores the projected picture as Screen Capture.
See "Creating your own startup screen" on page 38 for details.
Message
Selecting On displays the current information on the screen
when the projector is detecting or searching for a signal.
LAN Control
Settings
See "Controlling the projector through a LAN environment" on
page 39 for details.
Standby
Settings
See "Using the projector in standby mode" on page 45 for
details.
High Altitude
Mode
A mode for operation in high altitude areas. See "Operating in a
high altitude environment" on page 37 for details.
DCR
Enables or disables the DCR (Dynamic Contrast Ratio) function.
Selecting On enables the function and the projector will
automatically switch the lamp mode between normal and
economic modes according to the input image detected.
This function is only available when a PC source is in use.
After enabling DCR, frequent lamp mode switching may
shorten lamp life and noise level will vary during operation.
4. SYSTEM SETUP: Basic menu
I
I
5. SYSTEM SETUP: Advanced menu