Filter
Top Products
38ViewSonic PJL6243
38
Video System Selection
1
AVSystemMenu(VideoorS-video)
AVSystemMenu(Component)
2
If the projector cannot reproduce proper video image,
select a specific broadcast signal format from among
PAL, SECAM, NTSC, NTSC4.43, PAL-M and PAL-N.
PAL/SECAM/NTSC/NTSC4.43/PAL-M/PAL-N
The projector automatically detects an incoming video
signal, and adjusts itself to optimize its performance.
If the projector cannot reproduce proper video image,
select a specific component video signal format from
among 480i, 576i, 480p, 576p, 720p, 1035i and 1080i.
Auto
COMPONENTVIDEOSIGNALFORMAT
Video or S-video
Component
The projector automatically detects an incoming video
system, and adjusts itself to optimize its performance.
When Video System is PAL-M or PAL-N, select the
system manually.
Auto
Note:
The AV System Menu cannot be selected
when selecting RGB(Scart).
Press the MENU button to display the On-Screen
Menu. Use the Point ▲▼ buttons to select Input
and then press the Point ► or the SELECT button.
Select Video, Computer1(S-video) or Computer
1(Component) input source. (See pages 36-37)
3
Use the Point ▲▼ buttons to select System and
then press the Point ► or the SELECT button. Use
the Point ▲▼ buttons to select the desired system
and then press the SELECT button.
Video Input