ViewSonic PJL6243 Projector User Manual


  Open as PDF
of 177
 
37ViewSonic PJL6243
37
Video Input
Choose Computer1(Component) or Computer1(Scart)by pressing the COMPONENT or the COMPUTER 1
button on the remote control.
Before using these buttons, correct input source should be selected through Menu operation as described below.
1
Input Menu
2
Use the Point ▲▼ buttons to select Computer 1
and then press the Point ► button.
InputSourceSelection(Component,RGBScart21-pin)
When the input source is coming
from video equipment connected
to the COMPUTER IN 1/S-VIDEO
IN/COMPONENT IN terminal with
a Component-VGA Cable, select
Component.
Component
When the input source is coming
from video equipment connected
to the COMPUTER IN 1/S-VIDEO
IN/COMPONENT IN terminal with a
Scart-VGA Cable, select RGB(Scart).
RGB(Scart)
Press the MENU button to display the On-Screen
Menu. Use the Point ▲▼ buttons to select Input
and then press the Point ► or the SELECT button.
Note:
When the Input Search function is set to On 1
or On 2, the input signal will be searched
automatically (p.45).
COMPUTER1button
Remote Control
3
Use the Point ▲▼ buttons to select Component or
RGB(Scart) and then press the SELECT button.
Computer1(RGB)
Computer1(Scart)
COMPONENTbutton
Computer1(Component)
Direct Operation
Menu Operation
Press the Point ▲▼ buttons
to select Component or
RGB(Scart).
 previous next