Filter
Top Products
ENGLISH
ViewSonic PJL624339
39
Setting up the projector
Click Setting on the main menu. This function is to set up the projector.
Select the sub menu [Screen setting] or [Setting] and then set up each set-
ting.
Setting up the projector
Item Description
Screen ..................... Switches the screen mode. (Normal, Full, Wide(16:9), Zoom, True, Custom) There may
not be available mode depending on the input mode as shown in the table below.
Ceiling ..................... Sets the image top/bottom and left/right reversed. (ON, OFF)
Rear ........................... Sets the image left/right reversed. (ON, OFF)
Reset......................... Resets the Screen settings.
Input source
Screen mode Video Computer
Normal 4 4
Full 4 4
Wide(16:9) 4 4
Zoom 4 4
True * 4
Custom 4 4
* The mark "4" means that the available screen mode
in the selected input source system. The error message
appears when selecting the disabled screen mode indi-
cated with "*".
Screen setting
This function is to adjust the screen mode of
the projector. The values in the text box rep-
resent the current screen status.