Filter
Top Products
18ViewSonic PJL6243
18
The preparation display will disappear after 3 seconds.
(See page 52 for Lamp control status.)
TurningOntheProjector
Connect the projector’s AC power cord into an AC
outlet. The POWER indicator lights red. Open the
lens cap.
Press the ON/STAND-BY button on the top control
or on the remote control. The POWER indicator
lights green and the cooling fans start to operate.
The preparation display appears on the screen.
2
3
1
Complete peripheral connections (with a computer,
VCR, etc.) before turning on the projector.
Selected Input Source and Lamp
Control
Note:
The Filter warning and Lamp replacement
icons may appear on the screen depending
on the usage state of the projector.
Basic Operation
4
After about 3 seconds, the input source that was
selected the last time and the lamp control status
icon (see page 52) appear on the screen.
Note:
• When the Logo select function is set to Off,
the logo will not be shown on the screen
(p.46).
• When Off is selected in the Display function,
the preparation display will not be shown on
the screen (p.46).
• When the Input Search function is set to
On 2, the input signal will be searched
automatically (p.45).
• When Off is selected in the Display function,
the Video/PC selection window and the input
signal guidance window are not shown on
the screen. (p.46)
5
If there is no signal input when start on the projector,
or the current signal is missed while operating the
projector, the Video/PC selection window will be
displayed on the screen, please move the pointer to
input source desired by pressing the Point ▲▼
buttons and press the SELECT button. And then
follow the input signal guidance window to correct
the signal and connection.
If the projector is locked with a PIN code, PIN code
input dialog box will appear. Enter the PIN code as
instructed on the next page.
Video/PCselectionwindow
Input signal guidance window
Video/PCselectionwindow
Input signal guidance window
Project Video
Project Computer
Cancel
Project Video
Project Video
Project Computer
Cancel
Project Computer
No signal
Current Input setting:Video
Is signal processed correctly?
Is cable connected properly?
No signal
Current Input setting:RGB
Is signal processed correctly?
Is cable connected properly?
Video
Lamp control status