ViewSonic PJL6243 Projector User Manual


 
29ViewSonic PJL6243
29
Computer Input
Auto PC Adjustment function is provided to automatically adjust Fine sync, Totaldots, Horizontal and Vertical
positions to conform to your computer.
PC adjust Menu
Auto PC Adjustment
Tostoreadjustmentparameters
The adjusted parameters from the Auto PC Adjustment
can be stored in the projector. Once the parameters
are stored, the setting can be done just by selecting a
Mode(1–10) in the PC System Menu (see page 28).
See also “Store” on page 31.
Note:
Fine sync, Totaldots, Horizontal and
Vertical position of some computers
cannot be fully adjusted with the Auto PC
Adjustment function. When the image is
not provided properly with this operation,
manual adjustments are required (pp.
30-31).
• The Auto PC Adjustment cannot be
operated when 480i, 576i, 480p, 576p,
720p, 1035i or 1080i is selected in the PC
System Menu (p. 28).
Press the MENU button to display the On-Screen
Menu. Use the Point ▲▼ buttons to select PC
adjust and then press the Point or the SELECT
button.
1
2
Use the Point ▲▼ buttons to select Auto PC adj.
and then press the SELECT button.
Auto PC adj.
Menu Operation
Use Point ▲▼ buttons to select Auto
PC adj. and press the SELECT button.
Please wait... appears while the Auto
PC adjustment is in process.