Filter
Top Products
31ViewSonic PJL6243
31
Computer Input
Store
To store the adjusted data, select Store and then press
the Point ► or the SELECT button. Move the highlight
to one of the Modes 1 to 10 in which you want to store,
and then press the SELECT button.
Mode free
To clear the stored data, select Mode free and then
press the Point ► or the SELECT button. Move the
highlight to the Mode that you want to clear and then
press the SELECT button.
Note:
• Displayarea(H/V)cannot be selected when 480i, 576i, 480p, 576p, 720p, 1035i or 1080i is
selected in the PC System Menu (p.28).
• When input computer signal to the projector, PC adjust will become available.
Reset
To reset the adjusted data, select Reset and press the
SELECT button. A confirmation box appears and then
select Yes. All adjustments will return to their previous
figures.
This Mode has stored
parameters.
Values of Totaldots, Horizontal,
Vertical, Display area H, and Display
area V.
Vacant
Press SELECT
button to store the
data.
Press MENU
button to close this
dialog box.
Mode free
Store