Filter
Top Products
16ViewSonic PJ402D
Powering On/Off the Projector
Powering On the Projector:
1. Remove the projector lens cap.
2. Complete the AC power cord and peripheral signal cable(s) connections.
3. Press the
button on the Projector Control Panel or the Power button on the
Remote Control to turn on the power.
4. Turn on your source (computer, notebook, DVD, etc.). The projector automatically
detects your source.
If the “Searching for source” message appears on the screen, ensure that
the appropriate signal cable(s) are securely connected.
If you are connecting multiple sources to the projector simultaneously, press the
SOURCE button on the Projector Control Panel or the Source button on the
Remote Control to select the desired source.
Warning:
Never look into the lens when the lamp is on. This can damage your eyes. It is
especially important that children are not allowed to look into the lens.
Powering Off the Projector:
1. Press the button on the Projector Control Panel or the Power button on the
Remote Control. A message will appear on the screen:
2. Press the
button on the Projector Control Panel or the Power button on the
Remote Control again to turn off the power. Wait until the lamp LED indicator turns
off.
Please wait until the fan motor and the lamp LED turn off before removing
the AC power cord from the projector.