Filter
Top Products
11
ViewSonic PJ500
NOTE:
Use the remote control at a distance of approximately 10 feet (3m) from the sensor on the
front of the projector, and within a range of 30 degrees left/right. Strong light and obstacles will
interfere with operation of the remote control.
Setup Menus
The following menus show adjustments and settings you may use when SETUP is selected at the top
of the menu. Part of the SETUP menu differs between RBG input and video input. Select an item
with the and buttons, and start operation. Use the Single menu to reduce menu size. See
Menu Select in Table 3.
AUTO Automatic Adjustment (for RGB input): Press the AUTO button. Horizontal Position (H.
POSIT), Vertical Position, (V. POSIT), Clock Phase (H. PHASE), and Horizontal Size (H.
SIZE), are automatically adjusted.
• Before using the AUTO feature, be sure to maximize the window of the application
displayed on-screen.
Automatic Adjustment (for Video Input): Press the AUTO button. A signal type appropriate
for the input signal is selected automatically. This is valid only when AUTO is set for VIDEO
on the menu.
• This operation requires approximately ten seconds. It may not function correctly with some
input signals.
BLANK ON/OFF Set/ Clear Blank Mode: press the BLANK button. A blank screen (no image) is displayed in
this mode. Access the Image menu to set the screen color for blank mode.
MENU ON/OFF (*) Menu Display Start/Stop: Press the MENU button.
• The menu display is terminated automatically after approximately ten seconds of inactivity.
MENU SELECT
Select Menu Type: From the Setup menu select a menu item using the
buttons,
then press the MENU SELECT button on the remote control. A single menu for the selected
item will appear on-screen.
• This is valid only for the Setup menu. Push the MENU SELECT button after selecting an
item such as BRIGHTNESS. A separate Brightness menu will appear on-screen.
Figure 10: Setup Menus
Table 4: Setup Menu
Item Actions/Description RGB Video/
S-Video
Component Video
480i/575i/480P 720P/1080i
BRIGHT
(Brightness)
Dark Light
XX X X
CONTRAST
Weak Strong
XX X X
Table 3: Basic Operation (Continued)
Item Description
SETUP INPUT OPT.IMAGE
BRIGHT
CONTRAST
SHAPRNESS
COLOR
TINT
COLOR BAL R
COLOR BAL B
ASPECT
SETUP INPUT OPT.IMAGE
100
100
800
SETUP INPUT OPT.IMAGE
BRIGHT
CONTRAST
V POSIT
H POSIT
H PHASE
H SIZE
COLOR BAL R
COLOR BAL B
ASPECT
RGB VIDEO / S-VIDEO
+1
+1
0
0
0
0
0
COMPONENT
BRIGHT
CONTRAST
COLOR
H PHASE
COLOR BAL R
COLOR BAL B
ASPECT
+1
+1
0
0
0
0
0
0
-2
+1
0
0