Filter
Top Products
ViewSonic PJ500
10
Basic Operation
Table 3 below refers to buttons on the projector control panel and on the remote control. Items
marked with (*) may be accessed from the projector control panel.
Table 3: Basic Operation
Item Description
INPUT SELECT Select Input Signal (*) : press the INPUT Button.
RGB > VIDEO > S-VIDEO > COMPONENT (>RGB)
Select RGB Input: Press the RGB button.
VIDEO/S-VIDEO/COMPONENT > RGB
Select Video Input: Press the VIDEO button.
RGB > VIDEO/S-VIDEO/COMPONENT
VIDEO > S-VIDEO > COMPONENT (>VIDEO)
• The selected signal name is displayed for approximately 3 seconds when the input signal is
changed.
POSITION Set/Clear Position Adjustment mode : Press the POSITION button.
The icon is displayed in the POSITION mode.
Image Position Adjustment: Press the buttons in the POSITION mode.
• Valid only in the MAGNIFY mode when a video signal is input.
• After approximately 10 seconds of inactivity the icon disappears and the POSITION
mode is cleared automatically.
RESET (*) Initialize Each item: Select an item and press the RESET button.
Initialize Position Adjustment: Press the RESET button and the POSITION mode.
This function is valid only when RGB signal is input.
• Valid except for: VOLUME, LANGUAGE, H PHASE, and WHISPER.
MAGNIFY
Set MAGNIFY Mode: Press the MAGNIFY button.
Move Magnified Area: Run the POSITION in the MAGNIFY mode.
Adjust Magnification: Press the MAGNIFY / button in MAGNIFY mode.
MAGNIFY (+) magnifies the image. MAGNIFY (-) reduces the image.
Clear MAGNIFY Mode: Press the MAGNIFY button.
• The MAGNIFY mode is cleared by selecting AUTO, ASPECT, INPUT SELECT, or VIDEO,
or changing the input signal.
FREEZE
Set/Clear FREEZE Mode: Press the FREEZE button. When the [ ] icon is displayed, the
image is frozen in the FREEZE mode.
• The FREEZE mode is cleared by selecting POSITION, VOLUME, MUTE, Automatic
Adjustment, BLANK ON/OFF, or MENU ON/OFF, or by changing the input signal.
• Do not forget to clear frozen static images.
KEYSTONE (*)
Set/Clear KEYSTONE Mode: Press the KEYSTONE button.
Adjust Keystone: Press the buttons in the KEYSTONE mode.
reduces the width of the bottom of the projected image. reduces the width of the top
of the projected image.
VOLUME
Volume Adjustment: Press the VOLUME buttons on the remote control.
(up arrow) increases the loudness of the sound, and (down arrow) decreases the loudness of
the sound.
MUTE
Set/Clear Mute Mode: Press the MUTE button. The sound is silenced in this mode.