Filter
Top Products
ViewSonic PJ500
22
Audio is
present but no
video
The projector is not
correctly connected.
Connect correctly. page 7
page 8
The brightness is set to
minimum.
Select BRIGHT and CONTRAST with the MENU button and
press the button.
page 11
Colors are
pale and color
matching is
poor
Color density and color
matching are not correctly
adjusted.
Go to Setup and adjust color parameters. page 11
Images are
dark
Brightness and contrast
are not correctly adjusted.
Go to Setup and adjust COLOR and BRIGHTNESS. page 11
The lamp is nearing the
end of its service life.
Replace lamp. page 18
Images are
blurred
Focus or H PHASE is out
of adjustment.
Adjust the focus or H PHASE. Refer to Focus Ring
adjustment control.
page 9
page 12
Table 11: Symptom (Continued)
Symptom Possible cause Remedy Page