ViewSonic PJ500 Projector User Manual


 
23
ViewSonic PJ500
Specifications
Technical Specifications
Table 12: Specifications
Item Specification
PJ500 Liquid crystal projector
Liquid crystal Panel Size
panel Drive system
Pixels
1.8 cm (0.7 inch)
TFT active matrix
800 horizontal x 600 vertical
Lens Zoom lens F=2.0 - 2.3 f=18 -21 mm
Lamp 150 W UHB (normal mode); 130 W UHB (whisper mode)
Speaker 1.0 W
Power Supply AC 100 ~ 120V, 2.7A I AC220 - 240V,1.3A
Power consumption 240 W
Battery type CR2025, 3v micro-lithium
Temperature range 0 ~ 35°C (Operating)
Size 11.4 (W) x 3.3 (H) x 8.3 (D) inches 289 (W) x 83 (H) x 210 (D) mm
Weight 5.4 lbs. (2.4 kg)
Computer RGB IN
(RGB signal
input)
Plug & Play
AUDIO IN
Video: Analog 0.7 Vp-p, 75 ohm terminator (positive), HV. sync.: TTL level
(positive/negative), Composite sync.: TTL level, D-sub 15-pin shrink jack
Native resolution 1024 x 768
DDC 1/28 (VESA)
200m Vrms, 47 k ohms (max. 3.0Vp-p), Stereo mini jack
Video signal VIDEO
input (Composite)
S-VIDEO
COMPONENT
VIDEO
AUDIO
1.0 Vp-p, 75 ohm terminator, RCA jack
NTSC, NTSC4.43, PAL (BGDHI), SECAM, PAL-M, PAL-N, PAL60
Brightness signal: 1.0 Vp-p, 75 ohm terminator, Color signal: 0.3 Vp-p (burst
signal), 75 ohm terminator, Mini DIN 4-pin jack
480i, 575i, 1080i, 720i
Y 1.0 Vp-p, 75 ohm Terminator (Positive)
C
B
/C
R
0.7 Vp-p, 75 ohm Terminator (Positive)
P
B
/P
R
0.7 Vp-p, 75 ohm Terminator (Positive)
L 200 m Vrms, 47 k ohms (max. 3.0 Vp-p)
RRCA jack
Control functions CONTROL D-sub 15-pin shrink plug (RS232)
Lamp Replacement Lamp: RLC-150-001
(For parts contact your dealer or ViewSonic.)
Slot for Kensington lock (For parts contact your dealer or ViewSonic.)