Filter
Top Products
13
ViewSonic PJ500
Input Menu
The following functions are available when INPUT is selected on
the menu. Select an item with the and buttons, and start
operation.
Table 5: Input Menu
Item Description
AUTO
Operation Start/Stop: Press the button.
Automatic Adjustment at RGB Input: Select the EXECUTE
with the button. Horizontal position (H.POSIT), vertical position
(V.POSIT), clock phase (H.PHASE), and horizontal size (H.SIZE) are automatically
adjusted. Use with the window at maximum size in the application
display.
• This operation requires approximately 10 seconds. This operation may not function
correctly with some input signals; pressing the AUTO button in this case may correct the
problem.
• This function is the same as for the AUTO function in Basic operation.
RGB
Displays RGB Input Frequency: Displays the horizontal and vertical sync signal
frequencies for RGB input.
• Valid only at RGB input.
VIDEO
Operation Start/Stop: Press the button.
Select Video Signal Type: Select the signal type with the and buttons. Select
NTSC, PAL, SECAM, NTSC4.43, M-PAL, or N-PAL as appropriate for the input signal. The
selection of AUTO enables and executes the function AUTO (Automatic Adjustment at
Video Input), except for the N-PAL input.
• Use this function when the image becomes unstable (eg. the image becomes irregular, or
lacks color) at VIDEO/S-VIDEO input.
• Automatic Adjustment requires approximately ten seconds. It may not function correctly
with some input signals. Pressing the AUTO button in this case may correct this problem
except for the N-PAL input.
• For the COMPONENT VIDEO input, this function is not effective and the signal type is
distinguished automatically.
HDTV
Operation Start/Stop: Press the button.
Select HDTV Mode: Select the 1080i mode or 1035i mode suitable for the input signal with
the and buttons.
• When the selected HDTV mode is incompatible with the input signal, the image may be
incorrect (eg. the display position or color is incorrect).
SETUP INPUT OPT.IMAGE
AUTO
RGB
VIDEO
HDTV
EXECUTE
CANCEL