Filter
Top Products
Operation 39
Function Description
Color Mode
Pre-defined picture modes are provided so you can optimize
your projector image set-up to suit your program type. See
"Selecting a picture mode" on page 29 for details.
Reference
Mode
Selects a picture mode that most suits your need for the image
quality and further fine-tune the image based on the selections
listed on the same page below. See "Setting the User 1/User 2
mode" on page 30 for details.
Brightness
Adjusts the brightness of the image. See "Adjusting Brightness"
on page 30 for details.
Contrast
Adjusts the degree of difference between dark and light in the
image. See "Adjusting Contrast" on page 30 for details.
Color
Adjusts the color saturation level -- the amount of each color in a
video image. See "Adjusting Color" on page 31 for details.
Tint
Adjusts the red and green color tones of the image. See
"Adjusting Tint" on page 31 for details.
The function is only available when Video or S-Video with
NTSC system is selected.
Sharpness
Adjusts the image to make it look sharper or softer. See
"Adjusting Sharpness" on page 31 for details.
Brilliant
Color
Adjusts white peaking while maintaining correct color
presentation. See "Adjusting Brilliant Color" on page 31 for
details.
Color
Temperature
See "Selecting a Color Temperature" on page 31 for details.
Save
Settings
Saves the settings made for the User 1 or User 2 mode.
Quick Auto
Search
See "Switching input signal" on page 24 for details.
2. PICTURE menu
3. SOURCE
menu