Filter
Top Products
5
4400 USB S
CANNER
I
NSTALLATION
G
UIDE
C
ONNECTING
THE
S
CANNER
Your Visioneer 4400 USB scanner connects to any available USB port.
Check your computer’s manual for the USB port location.
To connect your Visioneer 4400 USB scanner:
1. Plug the USB cable on the back of your scanner into any USB port
on your computer.
If the plug does not attach easily, make sure that you are plugging it
in correctly. Do not force the plug into the connection.
2. Plug the power supply cable into the jack on the back of the
scanner, then plug the power supply into a wall outlet.
Note
: You do not have to shut off the power to your computer when
connecting the scanner.
Note
: If you have not installed the software yet, unplug the cable
from the computer and install the software now. When the software
installation is complete a message tells you to connect the scanner.
Power supply USB Cable