Filter
Top Products
-7-
Mounting the Flash Onto Your Camera
Once batteries are inserted into your flash, you can proceed to mount it onto your camera.
To do so, first ensure that the ON/OFF swtch is in the OFF position. Next, slide the flash’s
hotshoe base onto the camera’s hot shoe then rotate the lock ring until it is fastened
securely. Slide the ON/OFF Switch to the ON position. When the Ready Light illuminates,
the flash is ready to fire. Pressing the Test Button will test fire the unit.
hot shoe
base
lock ring
TEST
TTL OK SL OFF OFF/ON READY
Button Controls on
Rear of Flash