Vivotek 3123 Webcam User Manual


 
- 27 -
www.vivotek.com
T: 886-2-82455282
F: 886-2-82455532
4. Check the “Event operation. The triggering condition can be set to detected motion
or status of the attached device,
5. Set the delay before detecting next event to avoid continuous false alarms following
the original event,
6. Set the delay to take snapshots after event to capture the direction of the moving
objects,
Send Snapshots When Motion is Detected
If no external sensor is available, the Administrator can use the built-in motion
detection to monitor any movement and sends snapshots via email for security check.
7. Click on “Motion detection” in the left column,
8. Check “Enable motion detection”,
9. Click on “New” to have a new window to monitor video,
10. Type in a name to identify the new window,
Enable