Filter
Top Products
- 16 -
www.vivotek.com
T: 886-2-82455282
F: 886-2-82455532
“Pan speed”
This selection box sets the moving range of the “Left” and “Right” commands.
“Tilt speed”
This selection box sets the moving range of the “Up” and “Down” commands.
“Zoom speed”
This selection box sets the moving range of the “zoom in” and “zoom out” commands.
“Focus speed”
This selection box sets the moving speed of the “focus near” and “focus far” commands.
The focus function is obvious when the optical zoom time is larger than 7.
“Auto pan”
This button commands the camera to pan from the current position to the left-most
and then to the right-most position. After panning, the camera returns to the original
position.
“Auto patrol”
This button commands the camera to patrol between the preset positions on the Patrol
List, which can be modified on the “Camera control page”. After one patrol cycle, the
camera returns to the original position.
“Stop” This stops the “Auto Pan” command or “Auto Patrol” command.
The CCD control buttons:
The set of the buttons is for controlling focus, iris and zooming.
Click to zoom telescopically
and see more clearly.
Click to zoom widely
and see more.
C
li
c
k
to
f
ocus
f
a
r
e
r.
Click to focus nearer.
Click to set IRIS
s
m
a
ll
e
r.
Click to set IRIS bigger.
Click to do auto focus.
Click to set auto IRIS.