Vizio N-8510MS Computer Accessories User Manual


  Open as PDF
of 4
 
6. WALL MOUNTING
The optional YC-280 Wall mounting bracket is required.
The YC-280 can be mounted to a one-gang electrical box.
6.1. Mounting
Step 1. Install the YC-280 to the wall.
Notes
• Use the appropriate screws for the construction
of wall.
• Wood screws 3.5 x 20 are supplied with the
YC-280.
• No fitting screws for an electrical box are
supplied.
Use commercially available screws.
Step 2. Hang the station on the wall mounting bracket
hook to install.
Push down the station body in the arrow
direction shown at right.
1
2
YC-280 Wall mounting
bracket (optional)
N-8510MS
Wood screw 3.5 x 20
(supplied with the YC-280)
Hook
Wall
surface
140
83.523.5
4.6 x 6
60
80
100
4.5 x 10
2-ø4.5
5037
60
Rubber foot mounting position
(desktop application)
148
72.1
83.5
208
66.2
YC-280
YC-280
Unit: mm
6.3. YC-280 Dimensional Drawing
Unit: mm
6.2. Installation Completion Drawing
7. DESKTOP INSTALLATION
The station can be used on a desk. In desktop installations, the front operation panel can be inclined 16˚ from the desk
surface for easier operation by attaching the YC-280 Wall mounting bracket to its bottom surface.
YC-280 Wall mounting bracket
N-8510MS
Hook
Rubber foot
(supplied with the YC-280)
7.1. Attaching the Bracket
Step 1. Attach the four rubber feet to the YC-280's bottom surface.
Step 2. Hang the YC-280's hook on the station's wall bracket
mounting slot to install.
Push up the YC-280 in the arrow direction shown below.
7.2. Installation Completion Drawing
205.2
16º
101.8
YC-280
Unit: mm
 previous