Filter
Top Products
3
Getting Started
NOTE: Please keep User’s Manual as it contains important
information.
Unlock the packaging locks:
Rotate the packaging lock 90
degrees counterclockwise.
Pull out the packaging lock.
GETTING STARTED
BATTERY INSTALLATION
1. Make sure the unit is turnedMake sure the unit is turned OFF.
2. Locate the battery cover on the bottom of the
unit. Use a coin or screwdriver to loosen the
screw.
3. Install 3 new “AA” size (AM-3/LR6) batteries
following the diagram inside the battery
box. (The use of new alkaline batteries is
recommended for maximum performance.)
4. Replace the battery cover and tighten the screw to secure the battery
cover.
BATTERY NOTICE
• Install batteries correctly observing the polarity (+, -) signs to avoid
leakage.
• Do not mix old and new batteries.
• Do not mix batteries of different types: alkaline, standard (carbon-zinc)
or rechargeable (nickel-cadmium).
• Remove the batteries from the equipment when the unit will not be
used for an extended period of time.