Wagan 400 watt Power Supply User Manual


  Open as PDF
of 6
 
Slim Line 400 Watt Power Inverter by Wagan Tech
USER’S MANUAL — Please read before using this equipment.
_______________________________________________________________________________________________________________________
HEAT DISPERSAL
The inverter generates heat while it is working. This is
not a malfunction. However, if the inverter gets too hot
while working, it will turn off by itself.
Position the inverter where air flows freely around it to
allow the heat to disperse.
The inverter’s thermal protection prevents it from
operating when its temperature exceeds 130 ± 10 qF / 55
± 5 qC.
SPECIFICATION
Name Description
Input 12V (10-15V) DC
Output 110V AC
Output frequency 60 Hz
Output waveform Modified Sine Waveform
Continuous power 400 Watt
Surge power 1000 Watt
Efficiency Approx. 90 %
No load current < 0.3 A
Battery low alarm 10.5 ± 0.5 V DC
Battery low shutdown 10 ± 0.5 V DC
Alarm and thermal
shutdown
130 ± 10 qF / 55 ± 5 qC
Internal DC fuse None
External DC fuse 35 A
AC output socket 2 outlets of 3-prong
Power switch DC input ON/OFF control
Dimensions (LxWxH) 5x4.5x2 in³
Net Weight 1 lb
NOTE
All specifications are typical at nominal line, half load,
and 77 qF / 25 qC unless otherwise noted.
Specifications are subject to change without notice.
www.wagan.com
All Rights Reserved.
Wagan and Wagan.com are trademarks used by Wagan Corporation.
Printed in China
© 2003 Wagan Corporation.
5
 previous