Filter
Top Products
Chapter 4
54
Your Wasp WWR2900 / 2905 Scanners are ready for use. The default
settings of the Wasp WWR2900 / 2905 Scanners have been pre-
programmed for the most common barcode configurations. Use the
“WWR2900 / 2905 Scanners Setup & Configuration” sections only to
customize the Wasp WWR2900 / 2905 Scanners settings. Please review
the “Enable Barcode Symbologies” configuration beginning on page 14 to
see the list of barcode symbologies which are enabled by default.
Tip:
• Use the pre-printed “Barcode Test Symbols” in Appendix A on pages
29-31 as a test chart to practice scanning.
Quick Start
USB Connection
PS2 Connection
WWR2900_2905Manual0308_sm.A0 6/25/08 4:43 PM Page 5