Filter
Top Products
User Guide 2.3 3
Performing manual installation
Microsoft Windows NT or 2000
1Click Start => Programs => Command Prompt.
2 At the C:\ prompt, enter ipconfig/all. Press Enter.
3 Enter your current TCP/IP settings in the chart provided
below.
4Click
Cancel.
Microsoft Windows 95 or 98 or ME
1ClickStart => Run.
2 At the C:\ prompt, enter
winipcfg. Click OK.
3 Select the “Etherenet Adapter.”
Enter your current TCP/IP settings in the chart provided below.
4Click Cancel.
Macintosh
1Click Apple menu => Control Panels => TCP/IP.
2 Enter your current TCP/IP settings in the chart provided
below.
3Close the window.
Other operating systems (Unix, Linux)
1 Consult your operating system guide to locate the TCP/IP
screen.
2 Enter settings in the chart provided below.
3 Exit the TCP/IP configuration screen.